Fania-Love Tubes
  • Home
    • My Wishlist
  • News
    • Blog
  • TOU
  • Artwork
    • IM Letters
    • Wallpapers
    • Kits >
      • Freebies
      • PTU
      • Licenses and links
    • Tubes
    • CU >
      • CU freebies
  • Tutorials
  • My Masks
    • Masks (bulk dl)
    • Masks

A fairy nap

8/9/2014

0 Comments

 
Foto
Remember, my tutorials are a guideline only, you can use your own imagination :)


Materials used:
A scrapkit from Schnegges Scraps found here
A tube from ©Sherri Baldy from MTA here
A mask from Weescotslass #255 here

Filters used:
Eye Candy 4000: HSB Noise
----------------------------------------------
Let's Begin
New Image 600x600 pix. 72 dpi transparant.
Copy Paper 04 and paste as a new layer.
Apply the mask and merge group.

Copy frame02 and paste as a new layer.
Select the inside of the frame, selection, expand by 1 pix.
New layer.
Copy bubble and paste into selection.
Select none and move the bubble layer below the frame.
Activate the top layer.

Copy leaves and paste as a new layer, resize a little and move to the right.
Copy flower01 and paste as a new layer, resize by 50% move it on top of the leaves and duplicate this layer and move it again (see my tag)

Copy heart and paste as a new layer, move to the left.
Copy bird, paste as a new layer, image mirror.
Resize by 60%. Place on top of the heart.

Copy and paste your tube, resize if desired.
Copy and paste frog as a new layer, resize by 60%.

Give everything a dropshadow as desired.
Add the correct © & license info and your name.

If you do not wish to animate you can save it as jpg or png. And you are done.

If you want to animate read further.
Add a white layer atthe bottom of your tag.
Activate the layer with the heart.
Apply HSB noise with these settings.


Picture

Copy merged and paste into Animation Shop as a new animation.
Go back to PSP, undo the HSB, apply HSB noise again but hit random seed once.
Copy merged and paste in AS after current frame.
Do this a few more times untill you have a total of 5 frames in AS
Select all frames and set the frame properties to 25.


Save as gif :)
Hope you liked it
©Sandra 9-Aug-2014

0 Comments

Happy 4th

6/10/2014

0 Comments

 
Foto

Remember, my tutorials are a guideline only, feel free to give it your own spin :)


Materials used in this tut:
-A ftu scrapkit form Tasha's playground called The Red, White & Blue
-A forum template by spawn, #120 here
-A tube from Sharron Wiley @ MTA
-The filters mura's Meister: Copies & Eyecandy 4000 :Gradient glow



Let's Begin


Open up the template, duplicate ( SHIFT+D) and close the original.
Delete the credits layer.
Activate main background:
Selections, select all
Copy paper 10 and paste into selection, select none


Delete the Background circles layer.
Activate left circle background and drag this one layer down.
Now you can merge the left  & right circle layer to one layer.
Do the same with the left & right circle layers, merge them to one layer.


Activate the merged left & right background layer.
Selections, select all, float, defloat, selections invert.
Copy paper11 and paste as a new layer. Hit Delete.Select none.
Delete the original layer.


Activate the merged left & right circle layer.
Adjust, add noise: Uniform, 100%, Monochrome checked.
Adjust, colorize, choose a red color.
Merge down.


Activate middle circle background.
Selections, select all, float, defloat, selections invert.
Copy paper13 and paste as a new layer. Hit Delete.Select none.

Delete the original layer.


Activate the middle circle border.
Adjust, add noise: Uniform, 100%, Monochrome checked.
Merge down.



Copy heartbrad and paste as a new layer.
Select the heart on the inside with your magic wand.
Selections, expand by 10 pix.
Make a new layer under the heartbrad layer.
Copy paper 10 and paste into selection.
Do not de-select yet.


Copy your tube and move the face (or an other part) into the heart frame.
Selections invert and hit delete. Select none.
Merge down.
Activate the heartbrad layer.
Copy star4 and paste as a new layer, move it to the right side ( look at my tag for reference).
Layers duplicate, image mirror, merge down.


Now crop merged opaque (crop your whole image).
You can add shadow to the different elements and layers as you like.
When you are done, merge visible.


Image, canvas size: 700x500 pix, position is centered.
Add a drop shadow.
Effects, mura's meister, copies :After image(rotate random) default settings.


Copy wordart and paste as a new layer.
Effects, eyecandy 4000, gradient glow.
Set glow width to 3 and choose a red color or blue.
Move it a bit to the right and up.


Copy and paste your tube as a new layer, Position where you like and add a drop shadow.
If you are happy, crop merged opaque.
Resize if needed , don't resize after you put on the copyright and license info.
I resized mine to 550 pix width and sharpened every layer once.


Add the correct copyright and license info on the tag and add your name


You are done, save as jpg or png
I hope you enjoyed this tut


©Sandra, 10-Jun-2014

0 Comments

Breathe PTU

3/24/2014

1 Comment

 
Foto

Remember, my tutorials are only a guideline, let your imagination free :)
Materials needed:
-A scrapkit of choice, I used:
from Honored Scraps @ Whimsical Divas called: Just Breathe
-A mask of choice: I used one of my own, FL-Mask076, download here
-A tube of choice: I used ©Aleksandra @ MTA


Let's begin...


Open a new image 600x600 transparant.
Selections, select all.
Copy paper08 and paste into selection.
Select none.
Apply the mask you want to use.
Merge group.

Now here is something different, instead of telling you where to put all the elements I have made a tag-build-up animation to show you how I did mine.
The original idea for this animation comes from René Kunert aka giZZy, and I was given permission to use it in my tutorials, Thank you giZ you're the best!!
http://www.rebel-dezigns.com/
The animation starts after I have applied the mask.


Foto

Paste your tube, give everything a drop shadow as desired 
Add the correct copyright & license info after you have resized!

Finished :D
I hope you liked it

©Sandra 18-Sept-2013

1 Comment

'T Was the Night

3/23/2014

0 Comments

 
Foto



Remember, my tutorials are only a guideline, let your imagination free :)
Materials needed:
-A scrapkit from A space between : 'T Was the night
-A tube of choice : I used ©Leigh Young @ MTA
-My materials, containing a starry overlay and wordart


Let's begin...
Open new file 600x600 transparent
Selections, select all
Copy paper2.png and paste into selection
Selections contract 30 pixels, selections – modify feather – 30 pixels
Selections invert, hit DELETE twice
Selections, Select None

Copy and paste my starry overlay as a new layer.

Copy Ilex2.png and paste as a new layer
Drop Shadow of choice
Place  in the lower left corner
Layer duplicate, Image flip
Layer merge ,merge down
Layer Duplicate, Image mirror
Layer merge ,merge down

Copy RibbonFrame1.png and paste as a new layer
Image, resize 80%, all layers not checked
With your magic wand select insde the frame
Selections, modify, expand 8 pixels
Copy paper6.png and paste as a new layer
Selections, invert, hit delete
Selections, select None
Layers, arrange, move down

Activate your frame layer
Layers duplicate
Copy your tube and paste as a new layer
Resize if needed and place little to the left side of the frame ( see example)
Layers arrange, move down
Give the lower frame Drop Shadow of choice.
With your eraser erase the bits of your tube that are below the frame
Activate your upper frame layer and erase the pieces that covers the head

Duplicate  your upper frame
Copy Cane1.png and paste as a new layer
Layers, arrange, move down
Image, Free Rotate..  90 degrees left, all layers not checked
Image, Flip, place the cane  on the bottom left side( See exaple)
Give Drop Shadow of choice
Activate the upper frame and erase the bottom side which covers the cane

Copy ball7.png and paste as a new layer
Place the ring in the middle of the knot from the frame
Give Drop Shadow of choice
Copy Flower3.png and paste as a new layer
Image, resize 40%, all layers not checked
Adjust, Sharpness, sharpen
Give drop shadow of choice and place the flower on the top of the string 

Copy my wordart and paste as a new layer
Place the wordart in the ball

You are done !
Add your name, correct copyright & license info on the tag after you have resized.




©Sandra 08-Dec-2010
rewritten 28-Jan-2013
re-rewritten 23-March-2014

0 Comments

    Author

    Here you will find another passion, writing tuts, I love seeing your results.

    Archives

    May 2016
    September 2015
    April 2015
    August 2014
    June 2014
    May 2014
    March 2014

    Categories

    All
    Aleksandra
    Animated
    CDO
    Christmas
    CT
    DAH
    FTU
    GiadaC
    Janna Prosvirina
    Leigh Young
    Martin Abel
    MTA
    PTU
    Sarah Pauline
    Sharron Wiley
    Sherri Baldy
    Tony T

    RSS Feed

Powered by Create your own unique website with customizable templates.